Manual Generator Controller Module: EGC-250

FEATURES
  • Display of 3 Phase Generator Parameters:  Voltage, Frequency, Speed, Run Hours
  • Measurement and display of Load current and Instantaneous load in kW
  • Metering Energy for DG.
  • Wide range of Programmable Parameters, including settings of voltage, frequency & different delay times
  • Wide range of Analogue Sensor Selection
  • Programmable DI/DOs
  • Fixed the combined input-output charge alternator port with short circuit protection
  • Fault records & Event records with a date and time stamp
  • Logical interlock for Mains & DG breaker for fail-safe operation
  • Wide array of time circuits for start delay, stop delay, re-cooling etc
  • Full engine safety functions: The unit has Low Lube Oil Pressure (LLOP), Hi Coolant Temperature (HCT), Over speed, Start Failure, Stop Failure, Fuel level trip, Emergency stop and Overload trip functions

EGC-250 is a MANUAL Generator controller module including protection for a standby power supply (Generator/DG Set). It uses a single advanced microcontroller chip for easy and trouble-free DG control. It is cost cost-effective solution for DG operation. The user can start the DG manually or automatically using remote mode operation. The user can control the DG or the Mains breaker using the front keys or DI. In any faulty condition, it raises an alarm. All alarms occurring at abnormal DG conditions are detected and displayed on the LCD, and if necessary, DG is stopped and the hooter gets activated.

  • The module ensures full safety for the generator set with built-in functions for critical conditions
  • It measures and displays crucial parameters for both the generator and the mains supply
  • The controller records faults and events with date and time stamps
  • The EGC-250 features a wide range of programmable parameters, including settings for voltage, frequency, and various time delays
  • Equipped with an alphanumeric LCD and keypad, the module is designed for ease of operation and clear annunciation of status and alarms.
  • The Relay supports both manual operation via front panel push buttons and remote operation